If you’re a Jeep Wrangler owner or enthusiast, you might have heard the term “bolt pattern” mentioned when it comes to upgrading your wheels or tires. The “bolt pattern” refers to the number of bolts on your Jeep’s wheels and the distance between them, which is measured in millimeters.
According to Quadratec, Installing new wheels with the same bolt pattern as before, will give you a proper fit and helps you in avoiding any issues or damages while driving.
In this guide, we will go over the Jeep Wrangler bolt pattern, including the bolt pattern table for various Jeep Wrangler models.
Bolt Pattern of Jeep Wrangler?
The Bolt Pattern of Jeep Wrangler is 5x127mm, also known as 5×5 inches. This means that the Jeep Wrangler has five lug nuts, and the distance between them is 127mm or 5 inches.
This bolt pattern is common among many Jeep models, including the Jeep Grand Cherokee and the Jeep Commander.
Jeep Bolt Pattern Chart:
The following Chart shows the bolt pattern for various Jeep Wrangler models:
Model Year Bolt Pattern
Jeep YJ Bolt Pattern (1987-1995) 5×4.5
Jeep Tj Bolt Pattern (1997-2006) 5×4.5
Jeep LJ Bolt Pattern (2004-2006) 5×4.5
Jeep JK Bolt Pattern (2007-2018) 5×5
Jeep JL Bolt Pattern (2018-2023 ) 5x5
As you can see from the table, the bolt pattern for the Jeep Wrangler YJ, TJ, and LJ models is 5×4.5 inches, while the bolt pattern for the Jeep Wrangler JK and JL models is 5×5 inches.
How to Measure Bolt Pattern?
Measuring the bolt pattern of your Jeep Wrangler is a simple process that requires a few tools and a bit of patience. By following our below given steps, you can accurately determine your Jeep’s bolt pattern and ensure that any new wheels or tires you purchase will fit properly.
Gather the Necessary Tools:
To measure the bolt pattern of your Jeep, you’ll need a few tools. These include a measuring tape, a ruler or caliper, and a bolt pattern gauge. The bolt pattern gauge is a tool that helps you determine the bolt pattern of your wheels accurately.
Count the Number of Bolts:
The first step in measuring your Jeep’s bolt pattern is to count the number of bolts on one of your wheels. Most Jeep Wrangler models have a 5-bolt pattern, but some older models may have a 4-bolt pattern.
Measure the Bolt Circle Diameter:
The next step is to measure the bolt circle diameter. This is the distance between the center of one bolt to the center of the bolt directly across from it. To do this, you’ll need to measure the distance between the center of two adjacent bolts. You can use your measuring tape or ruler to measure this distance in millimeters.
Use a Bolt Pattern Gauge:
Once you have the bolt circle diameter measurement, you can use a bolt pattern gauge to determine the exact bolt pattern of your Jeep. The bolt pattern gauge is a circular tool with studs that correspond to different bolt patterns. Place the gauge over the wheel’s bolt holes to see which studs line up with the holes. The studs that line up with the holes on your Jeep’s wheel will indicate the bolt pattern of your wheel.
Verify your Measurements:
To ensure accuracy, it’s a good idea to measure the bolt pattern of all four of your Jeep’s wheels. This way, you can verify that your measurements are consistent across all four wheels.
Understanding the bolt pattern of your Jeep Wrangler is essential when it comes to buying new wheels. The Jeep Wrangler bolt pattern is 5x127mm or 5×5 inches, and it varies depending on the model year. The bolt pattern table provided in this guide should help you identify the correct bolt pattern for your Jeep Wrangler model. Remember to always double-check the bolt pattern before purchasing new wheels to ensure a proper fit.