The ability to remove the doors of jeep wrangler make it a very ideal choice for adventures. Taking off the doors can provide an exhilarating open-air driving experience, allowing you to fully embrace the freedom of the great outdoors.
If you’re curious about how to remove jeep wrangler doors but unsure where to start, you’ve come to the right place.
In this guide, we’ll walk you through the step-by-step process of safely and easily taking off the doors of your Jeep Wrangler. So, let’s dive in discover the guide!
How to Take Jeep Wrangler Doors Off? | Step By Step Guide
Here is a step-by-step guide to help you take the doors off your Jeep Wrangler:
Gather the Necessary Tools:
Before starting, gather the following tools: a T50 Torx bit, a ratchet or wrench with a T50 Torx socket, and a soft cloth or towel to protect the doors and body.
Roll Down the Windows:
Ensure that the windows are fully rolled down. This step will prevent any potential damage or interference when removing the doors.
Disconnect the Wiring Harness (if applicable):
If your Jeep Wrangler has power mirrors, power locks, or speakers in the doors, you’ll need to disconnect the wiring harness. Locate the wiring connector near the door hinge and unplug it carefully. Some models may require removing an access panel to access the connector.
Remove the Door Retaining Bolts:
Locate the door retaining bolts, which are located on the door hinges. There are typically two bolts per door. Use the T50 Torx bit and a ratchet or wrench to remove the bolts. Keep them in a safe place to prevent loss.
Protect the Body and Doors:
Place a soft cloth or towel on the ground near the door opening to protect the doors and body from scratches or damage during removal.
Lift and Remove the Door:
With the bolts removed, carefully lift the door by the door handle and hinge side. It may be helpful to have a second person assist in supporting the weight of the door. Lift the door straight up and away from the vehicle, ensuring it is fully clear of the hinges.
Secure the Doors:
Once removed, place the doors in a safe and secure location. It is recommended to store them in a dry and protected area to avoid damage.
Install Door Retaining Straps (optional):
To prevent the doors from swinging freely while driving, you can install door retaining straps. These straps attach to the body and the door hinge, keeping the doors in a partially open position. Follow the manufacturer’s instructions for proper installation.
When operating your Jeep Wrangler without doors, certain safety precautions should be taken. Ensure that all occupants wear seatbelts, and be aware of any local laws or regulations regarding the use of doors on public roads. When you’re ready to reinstall the doors, simply reverse the steps outlined above, ensuring that all wiring harnesses are reconnected properly.
Is it legal to Drive Jeep Wrangler without Doors?
Some states allow you to remove the doors as long as you have side mirrors, while others require you to keep the doors on at all times. You should always check with your local DMV or law enforcement before you decide to go doorless, because you don’t want to get a ticket or cause an accident. Driving without doors can be fun and adventurous, but it can also be risky and illegal, depending on where you are.